Great Tip for Jelly Rolls and Honey Buns: Lint Control

6a00d8341cdb3f53ef0263e9672690200b.jpg

We are all familiar with Jelly Rolls and Honeybuns, right? If you are not, both are popular pre-cuts offered by fabric companies.  They are super convenient, and there are loads of books and patterns out there with wonderful ideas on how to use them. Pre-cuts are fabrics that are part of a complete designer collection that are cut into specific shapes.  If you buy a pre-cut, you get every piece in the collection, in a particular size package.  Charm packs are 5 inch squares.  Layer cakes are 10 inch squares. Jelly rolls are 2 1/2 inch by 42 inch strips.  Honeybuns are 1 1/2 inch by 42 inch strips.  The edges are pinked, not straight cut.

Which leads us to the main problem with pre-cuts:  the lint issue. Once you take them out of their protective plastic wrapping, the lint from the pinked edges gets everywhere. Every.Where.

6a00d8341cdb3f53ef026be413478c200d.jpg

I am a big fan of the Moda Fabrics website/blogsite.  You will find great ideas, sew-alongs, free patterns and tons more.  If you don't know it, you really should check it out. One of the more recent ideas shared on their blog was a tip from Moda designer Betsy Chutchian.  Here is her technique for reducing the lint issue. It is in an article about whether or not to pre-wash jelly rolls and honeybuns (no, don't do it, is what I say).

What she does is unwrap the roll and toss it in the clothes dryer on high for about 8 minutes. Stop the dryer, clean out the lint filter and do it again two more times, stopping after 8 minutes and cleaning the lint filter.  There will be a lot of lint.

6a00d8341cdb3f53ef026bde9480e2200c.jpg

You would think they would come out in a snarly tangled mess (which they would if you actually washed them). The dryer just kind of fluffs them up and they are not tangled at all.  And the lint has come off.

6a00d8341cdb3f53ef026be413488d200d.jpg

I got this amount of lint, three times, once for each 8 minute drying cycle.

6a00d8341cdb3f53ef026be41348a2200d.jpg

This is what you are left with.  The heat of the dryer shrinks the length of the strip a tiny bit, maybe a half-inch or so.  But the 1 1/2" width was not affected at all. The lint is gone.  There is a frayed thread or two along the strip, but it doesn't bother me nearly as much as the annoyance of that lint getting everywhere.

And do you know what?  I didn't even need to iron them!  They came out smooth and wrinkle-free.  Now, I wouldn't leave them sit in the dryer after the cycle ended.  I removed them immediately when the dryer stopped.

I think it's a great tip and will do it again when I use jelly rolls and honeybuns!

Share:

13 Responses

  1. Wow, thanks for passing this along, Nicole. Even the lint roller doesn’t get all the lint from the precuts, so I am happy to have another solution and give it a try.

  2. Wow! What an awesome idea! I would’ve thought they’d have shriveled up into a tangled mess. Will need to try that out!

  3. I’m surprised you didn’t end up with a rats nest. I wonder if you could get all that lint with a tumble without the heat

  4. Thanks so much for sharing that great tip, heading to the dryer with my jelly roll as soon as I post this. Have a lovely safe day.

  5. I found it shrinks too much on high heat and I didn’t like the raveling. I just bang them a lot on the table and hit it with a lint brush.

Leave a Reply

Your email address will not be published. Required fields are marked *

About Me

Nicole

Hello, I’m Nicole, an enthusiastic quilter and fabric lover. This blog is mainly about my quilting journey, but I share some of my other interests as well, which include reading, cooking, decorating, lifestyle, and my family. When I am not quilting, I am reading, and will share monthly book reviews in this space. I love to hear back from my followers and enjoy getting to know you.

Categories
Archives